Skip to content
EN · km
Units
My Garage
Generic SAE code Body and restraints

B0028: Right Side Airbag Deployment Control

The airbag module has detected a fault in the right side airbag circuit.

High risk

Have it checked promptly. The right side airbag may not deploy.

Short answer · Can I keep driving with B0028?

The car drives normally, but side impact protection may be reduced. Have it checked as soon as possible.

On this page

What does B0028 mean?

B0028 concerns the right side airbag, usually in the seat backrest. Seat connectors are a common cause.

What the car does when the code is set

The airbag warning light comes on. The affected airbag may not deploy in a crash.

How the system works

Each airbag has an igniter (squib) circuit. The airbag control module constantly checks the resistance of these circuits and stores a code when it is out of range, because the airbag might not deploy correctly.

BBody
0Generic code (SAE)
0Body and restraints
28Specific fault

Common symptoms

Possible causes

Listed without ranking. The cause on your car depends on make, engine and mileage — see the maker notes below.

  1. Connector or clock spring faultFor driver airbag codes, the rotating clock spring behind the steering wheel is a common cause.
  2. Seat wiring connectorsSide airbag connectors under the seats can loosen when seats are moved.
  3. Damaged wiringWires pinched by seat rails or trim.
  4. Faulty airbag module (inflator) circuitResistance outside the expected range.
  5. Previous repairsDisturbed connectors after interior work.

How it is diagnosed

  1. Treat the airbag light seriouslyThe affected airbag may not deploy in a crash.
  2. Do not disturb airbag parts yourselfAirbag diagnosis and repair should be left to trained technicians.Never probe airbag connectors or measure resistance across an airbag. Accidental deployment can cause serious injury.
  3. Tell the workshop about recent workSeat removal, steering wheel work or a collision helps narrow the cause.

Questions about B0028

Can I unplug the seat connector to check it?

No. Airbag connectors should only be handled by trained technicians.

Can I clear an airbag code myself?

The light may come back if the fault is still there. The system needs proper diagnosis.

Terms on this page