Two-bucket Wash Method
The two-bucket method uses one bucket for shampoo and one for rinsing the wash mitt to reduce scratches.
What is Two-bucket Wash Method?
Grit guards trap dirt. It reduces swirl marks. Pre-washing helps. Snow foam or a pre-wash spray loosens dirt before contact washing, so less grit touches the paint. Wash from the top down and leave the dirtiest lower panels and wheels until last, using separate mitts for wheels. A pH-neutral shampoo will not strip wax or sealant.
How it works
Dirt is rinsed off the mitt before it returns to the shampoo.
Why it matters for your car
Use clean microfibre. Avoid washing in direct sun.
Other terms
- Automatic High Beam
- Battery Warning Light (Charging Light)
- Blow-off Valve (Diverter Valve)
- Boot Capacity (Cargo Volume)
- Contact Cleaner (Electrical Cleaner)
- Cylinder Head
- Dual-clutch Transmission (DCT)
- ECU (Engine Control Unit)
- Engine Stalling
- Fuel Filter
- Galvanised Body (Zinc-coated Steel)
- Jacking Points
- MPV (People Carrier, Minivan)
- Multi-link Suspension
- Power Steering Fluid
- Seatbelt (Safety Belt)
- Shift Interlock
- Twin Carburettors
- Two-Post Lift (Vehicle Lift)
- Voltage Drop Test