Skip to content
EN · km
Units
My Garage
Generic SAE code Chassis and brakes

C0063: Yaw Rate Sensor

The control unit has detected a fault with the yaw rate sensor.

High risk

Have it checked soon. Stability control may switch off.

Short answer · Can I keep driving with C0063?

Usually yes, with care. Stability control may switch off. Have it checked soon.

On this page

What does C0063 mean?

C0063 points to the sensor that measures how fast the car turns around its vertical axis. Stability control compares this with the steering angle to detect skidding.

What the car does when the code is set

Stability control, traction control and some driver assistance systems may switch off.

How the system works

Stability control compares where the driver steers with how the car actually moves. It uses wheel speeds, steering angle, yaw rate and acceleration sensors. If one signal is missing or implausible, the system switches off.

CChassis
0Generic code (SAE)
0Chassis and brakes
63Specific fault

Common symptoms

Possible causes

Listed without ranking. The cause on your car depends on make, engine and mileage — see the maker notes below.

  1. Sensor not calibratedAfter alignment, steering or suspension work the sensor may need a zero-point calibration.
  2. Damaged sensor or wiringA knock, a loose mounting or chafed wires can upset the signal.
  3. Connector corrosionWater and salt attack plugs under the floor and in the steering column.
  4. Low battery voltageVoltage drops during starting can cause implausible readings.
  5. Failed sensor or modulePossible once wiring and calibration have been checked.

How it is diagnosed

  1. Note when the light comes onStraight after starting, after a pothole or only in corners helps the workshop.
  2. Think about recent workWheel alignment, steering or suspension repairs often require a sensor calibration.
  3. Check the batteryMeasure resting voltage and charge a weak battery.
  4. Read live data and calibrateA workshop compares the sensor value with the car standing still and driving straight, then calibrates it.

Questions about C0063

Does the yaw rate sensor need calibration?

On many cars yes, after it has been replaced or removed.

Do I need a calibration after wheel alignment?

On many cars yes. The steering angle sensor in particular must know the straight-ahead position.

Terms on this page